Features
- Limiter with adjustable threshold
- 12- and 48-volt phantom power
- Mic/line switches on each input and output
- Total Harmonic Distortion: 0.25% THD at +4 dBm output, 55 to 20,000 Hz
- Two position Mix Bus
Product Description
The Shure Model M367 is a six-input, portable microphone/line mixer/remote amplifier specifically designed for professional applications in electronic news gathering (ENG), electronic field production (EFP) and general audio mixing. Compact and rugged, the M367 is built to withstand the most demanding field production conditions. Power On, input clipping and output peak/limiter LEDs. 1 kHz tone oscillator switch . Low-cut filter switches, Headphone monitor circuit, VU metering, Easy-access side battery compartment, with battery check function, Power via two standard 9-volt alkaline batteries or 120/230V ac (detachable power cord supplied), Rack mountable with available A367R accessory. Frequency Response (controls centered): 20Hz to 20kHz, +/-2dB Output Clipping Level: greater than or equal to +18 dBm at line output into 600 ohms. Low-Cut Filters. Tone Oscillator: 1 kHz +/-20%. Limiter Threshold: Switchable: 0, +4, +8, +16 dBm, Attack Time: 1 ms +/- 0.5 ms, Release Time Constant: 100 ms +/-30 ms, 12 V Phantom: 12 V through 340 ohms. Phantom: 48 V through 3.4k ohms. AC Power: 100-120 Vac, 50/60 Hz, 100 mA. DC Power: 18 Vdc nominal at 40 mA typical no-signal, 45 mA typical at +4 dBm output; 13.5 Vdc minimum. Batteries: Two 9V alkaline batteries. Battery Life: Up to 8 hours at +4 dBm output in continuous use. Overall Dimensions (H x W x D): 2 13/16" x 12 5/32" x 9 5/32" (71.9 x 308 x 233 mm), including feet. Weight (without batteries): 6.6 lbs
